Видео

Explícame x favor como lo cambio

Thank you. Just noticed this issue now and I’m glad I don’t have to tear apart the whole dash!

What a joke. Ok, this is so easy I won't show you how to do it wtf? Impossible to put a screwdriver on the screw, even for Gumby. Update. I was able to remove the resistor by first busting off the plastic protector piece in front and pulling down the carpeting making it easier to put a stubby screwdriver on the back screw. I pulled gradually harder and harder with both hands on the 2"x2" piece and it busted out fairly easily and is a perfectly straight break. Bust it off maybe score the plastic first but once this is done, the 2 screws are more accessible. The one in front is easy as you will see and the one in back WILL COME OUT if you use a stubby screwdriver. The guy using a medium phillips is full of it, no way that fits on front or back. Oh, and the wire connector will pop right out if you push down on the tab with a screwdriver. Give it a decent amount of pressure, and POP out it comes!

The directions say It's 3 parts water and 1 part primer (1:3)....... NOT 1:2

Great vid. U can also remove the support for radiator overflow which is right there by the light on the fender. Just a single 10mm bolt, gave me even more room to work in there.

Ok so just watched this and wanna do it in the laundry room half the floor is unlevel like 12 ft by maybe three foot.. had vinyl stick flooring and now I wanna do the hook and latch floating floor... I removed vinyl and sanded glue off etc... Now I'm getting to this point I hate... I picked up levelquik primer and the level stuff... Now question one what silicone to use like rv clear silicone ?... Next is this area has two holes for air one for return and one for upstairs air... How do I go about trying to block that off as don't want it to go down .. also do I want to run tape along the wall when doing leveling compound ? Let me know please hoping for a fast response..

I'm getting irritated. Every single person starts off their video restating the title. Shut the hell up, and just show the steps to replace the God-forsaken headlight. Please. I selected your vid to show me how to replace the bulb. Not to hear who you are, where you got your bulb, how long you've been working on cars what color your mother-in-laws hair is. Just replace it.

George Corey 1 second ago My Ryobi RM480E has been a great, dependable lawn mower, until June 12th, 2021. when it just stopped moving forward or reverse. I purchased the extended warranty, so I called Asurion Home Depot and the company set up a pickup sure enough Ryobi service center picked it up. The service center sent out a repairman to check the mower before loading up on the truck, he looked it over and said well it doesn't move, so we need to take it into the shop, they loaded it, and about a week later called and said that mower was working and couldn't repeat the fault of not moving, so they brought the mower back. Asurion warranty found Ryobi service centers all over my area and had them pick up the mower and see if it could be repaired, in 9 months 5 additional service shops, but none were able to figure it out. The latest repair center spent 9 hours talking with Ryobi and receiving parts that Ryobi techs said would fit it, none of the parts fixed my mower. Ryobi even sent new batteries to see if that would do it, so as of yesterday the repairman has given up and said he was through working on it. Now I have a worthless Ryobi mower that no one can figure out why it's not moving. Here are a few of the things I have been told in my conversations with Ryobi and some service centers and even Home Depot, the mowers are not made by Ryobi but are made by ATI in China, and ATI has proprietary information they are not willing to share with Ryobi. Then I was told Walmart has the same mowers under the brand Hart, which is the same as the Ryobi models. I can not complain about Asurion or Ryobi's customer service, but I do blame the company that made this mower ATI.

thanks this saved me a lot of time and it works for a 2002 Nissan Altima 3.5

Thank you for sharing this video.I just want to find a way to seal my OSB subfloor.This is very useful.I have a question ,I want to install hardie backer board on my OSB subfloor then install tile.my subfloor is 20 years old and a little bit uneven .should I seal it first and put some floor compound patch(I don't want make self leveling, it make me feel messy ) to make it even, or put floor compound first then seal it?and one more question ,which brand silicone do you choice for the nail hole?Thank you so much in advance!

Do you have an update on how this mower for 2021? Is it still working good, or have you had to have any major repairs?

Finally, an answer to my OSB primer question. Neither Laticrete nor Mapei could answer what type of primer to use over OSB. Thanks .

Thank you so much!

This is what I needed. None of the Mapei videos address this. I'm working on a porch that was open to a basement because of cracks in the wood floor...

The battery is incredible the meter always still full after one hour cut!! I used to own a .65 acre yard and it took about 1 hour to cut, never had any issue.

It's been 4 years since this video was posted. How has the mower held up? Any issues?

Good evening, May I ask if you had any issues with it so far, do you recommend getting one or should I stick with a gas one

This guy is a seasoned vet

Great when it's working. How many Ryobi shops are available to do any major repairs or trouble shoot? And do they pick up the mower if they can't fix it at your location? Things to know before you buy any major outdoor equipment. Things the sales people don't tell you or maybe they don't even know. Buyer beware!!!

Buyer beware! This mower is made in China, and the batteries are only warrantied for 1 year. My Ryobi worked the first season, but the second season was dead (even after I keep the batteries charged up from time to time). By the time I got it in the shop the warranty had expired. New batteries would cost 1200 more or less according to Ryobi. I am still trying to see if Ryobi will do right by me, so I might update this comment at some point.

Level quik data sheet says not to do this.....I'm ok with that, but how is it holding up?

You only need to dilute it for wood. Use undiluted for concrete.

Do you have to dilute it? Can I use it full strength for better coverage over sanded grade plywood? I am doing a countertop on a large antique kitchen cupboard, and applying new tiles on it.

How do you get to the screws that hold the resistor. I can't even see them.

That IS th easiest way! Thanks!

Great video! Thank you very Much ⚡️😎⚡️

How bout the other side

I’ve watched several videos of this Ryobi mower & have noticed several of the units have that annoying squeak. Any ideas where it’s coming from and if something easily lubed?

Hows your tile doing. Is it hold up. Any cracks on tiles or buckling?

Thanks for the video. Three years isn't that long. But three years with zero problems and zero maintenance, and still counting. That's unheard of for any new product. especially one with a whole new power system. I saw a used one for $1,000. I think I'm going to get it.

nice vid! what is the dimension of the metal crate? i don’t have much space and was wondering if it would fit in the remaining space in my garage. thanks!

looks like level quick isnt available at my local hardware store. If I found another acrylic primer, would I just mix it 1:1 for a seal coat before adding the thin set?

Looks like a go cart with a mower! I really want to buy one to save time mowing. I also think of where to put a portable speaker to listen to while mowing!! I have a few Ryobi 40 volt tools that I really like for my 1 acre place!!!

What about the driver side genius

Glad to hear that the mower has held up over the years. What is your charging routine? Do you keep it plugged into the charger when not in use? Thanks!

Thanks for the great review! I saw your replies about how the battery has held up well for well over a year. Some of the reviews I’ve read have reported battery issues, but I wonder if some of those are because of user error...battery over-discharged and left without charge for long periods of time. What is your routine for taking care of this mower and charging? Do you leave it plugged in when not in use? Thanks.

This video saved me a lot of frustration. Thanks

The mower squeaks on other videos, as well. What's the causes the squeaks?

I'd like to see another video with taller grass to see how it does. Also, you save you haven't spent any money on the lawn mower in 3 yrs. Are you still on the same set of blades or have you had to sharpen them?

I can't watch the rest of this. Stopped @ 5:15. You have a sweet mower! You made a vid cutting a crap lawn in spring. You need to top dress and over seed you lawn first. Water, grow and wait! Then give the Ryobi a chance to glow and cut correctly. Oh, and btw, mow the right direction too.

I tried to take off the round part freaking impossible lol I’m weak

If I were you, I would at least add some engine noise, everybody’s used to that single piston engine on a lawnmower

Thanks for the helpful review. Can you share the link or website of the online comparison of electric vs gas mower that you mentioned at 7:35? The eco-friendly, lower cost of operation is appealing however I'm wondering if the savings on gas/oil is offset by the cost of replacing the four batteries over time. I really want this eco-friendly machine to be more cost effective but my back of the envelope calculations say otherwise. Looking at cost of ownership over a 10 yr period of a comparable gas rider at $1800 out the door + operation and maintenance versus the $2700 for this unit, at $10/year for the electric and $100/year for gas/oil it nets out to a $900 difference over 10 years of ownership which is exactly the difference in cost. Replacing each of the four batteries at $100 each over the 10 years puts cost of ownership in favor of the gas mower. Factoring in cost of environmental impact one could argue that the advantage still goes to the electric... although we still have to consider the impact of disposing of lead-acid batteries.

That squeaking would drive me nuts..lol. I'm thinking of grabbing one as my TORO bit the dust. TY for the vid.

I purchased this mower about 1 Month ago and have used it twice. I only have 1/4 acre and after cutting the battery bar still shows full charge. I have zero regrets thus far. Thanks for the video bro!

thanks, replaced bulb in 15 minutes.

Is this brand new OSB floors or did you remove the old flooring. I am currently removing tile and mortar from my OSB subset and the OSB is starting to show some marks as the motor is removed. Any recommendations?

why not show mowing in reverse? don't know how?

How is this machine going a couple years on? Batteries holding up?

I just purchased this mower with the bagger! Can't wait to use it. Please tell me what is on your garage floor?? Looks good!